Meter Mixing & Dispense Solutions

In-reservoir Heater

Request a Quote

Request a Quote

Answer a few questions below, or give us a call and we’ll get you a personalized quote.

(989) 772-4073

"*" indicates required fields

Name*
In order to help you get the correct equipment we would like to know what sort of work you need it to do. We are interested in knowing how much material you need and how often. For example: I’m potting an electronics part with 30cc per part. We need to run 800 parts per shift. Or: We need to supply mixed resin to vacuum infuse large FRP structures, using 80-250 gallons of resin per part. We often don’t need to know the proprietary details, just an outline of what the equipment requirements are.
Epoxies, Methacrylates, Silicones, and urethanes all need to be handled differently. The viscosity of the materials, and the mix ratio will often affect the metering equipment choices. If you could include a TDS (technical data sheet) it will help us get you the correct options.
Upload a TDS (Technical Data Sheet) or SD (Safety Data) so we can learn more about your material.
Max. file size: 25 MB.
How big are the shots dispensed, how many shots per shift, etc…
This field is for validation purposes and should be left unchanged.

Description

This heater is designed to fit inside 2.5 gallon, 8 gallon, or 13 gallon reservoirs to keep your material at the proper temperature. It is available with either a fixed set-point (92°F, 105°F, 115°F, 125°F, 142°F, 160°F, 172°F, 185°F) or a digital controller with a range between 0 and 200°F. Both units have thermal fuse protection. Customization is available for this heater. Please call for more information.

Specifications

  • 300W 110V or 220V
  • Aluminum Construction
  • Heats the material directly at the point of intake
  • Lower energy usage and faster warmup
  • Available with a fixed set-point, digital adjustable control, or PID control
  • Can be used with Michael Engineering agitators

 

In-reservoir Heater

Request a Quote

Request a Quote

Answer a few questions below, or give us a call and we’ll get you a personalized quote.

(989) 772-4073

"*" indicates required fields

Name*
In order to help you get the correct equipment we would like to know what sort of work you need it to do. We are interested in knowing how much material you need and how often. For example: I’m potting an electronics part with 30cc per part. We need to run 800 parts per shift. Or: We need to supply mixed resin to vacuum infuse large FRP structures, using 80-250 gallons of resin per part. We often don’t need to know the proprietary details, just an outline of what the equipment requirements are.
Epoxies, Methacrylates, Silicones, and urethanes all need to be handled differently. The viscosity of the materials, and the mix ratio will often affect the metering equipment choices. If you could include a TDS (technical data sheet) it will help us get you the correct options.
Upload a TDS (Technical Data Sheet) or SD (Safety Data) so we can learn more about your material.
Max. file size: 25 MB.
How big are the shots dispensed, how many shots per shift, etc…
This field is for validation purposes and should be left unchanged.

Related Products