Meter Mixing & Dispense Solutions

Filler Flash

Filler Flash

Request a Quote

Request a Quote

Answer a few questions below, or give us a call and we’ll get you a personalized quote.

(989) 772-4073

"*" indicates required fields

Name*
In order to help you get the correct equipment we would like to know what sort of work you need it to do. We are interested in knowing how much material you need and how often. For example: I’m potting an electronics part with 30cc per part. We need to run 800 parts per shift. Or: We need to supply mixed resin to vacuum infuse large FRP structures, using 80-250 gallons of resin per part. We often don’t need to know the proprietary details, just an outline of what the equipment requirements are.
Epoxies, Methacrylates, Silicones, and urethanes all need to be handled differently. The viscosity of the materials, and the mix ratio will often affect the metering equipment choices. If you could include a TDS (technical data sheet) it will help us get you the correct options.
Upload a TDS (Technical Data Sheet) or SD (Safety Data) so we can learn more about your material.
Max. file size: 25 MB.
How big are the shots dispensed, how many shots per shift, etc…
This field is for validation purposes and should be left unchanged.

Description

The Filler Flash is a foot-operated single-acting machine. The operator steps on the foot pedal to push the arm down, energizing the system. The springs then act on the arm to dispense material through the check valves, which counts as one cycle.

Specifications:

  • Will pump any flowable material.
  • Will pump viscosities up to 100,000 cps.
  • Ratio adjustable from 100:100 to 100:15 or 100:25 to 100:3.5
  • Maximum output rate of 1 quart per minute.
  • Delivers up to 4oz per stroke.
  • Designed for high accuracy metering and mixing.
  • Foot-operated with adjustable spring tension

Filler Flash

Request a Quote

Request a Quote

Answer a few questions below, or give us a call and we’ll get you a personalized quote.

(989) 772-4073

"*" indicates required fields

Name*
In order to help you get the correct equipment we would like to know what sort of work you need it to do. We are interested in knowing how much material you need and how often. For example: I’m potting an electronics part with 30cc per part. We need to run 800 parts per shift. Or: We need to supply mixed resin to vacuum infuse large FRP structures, using 80-250 gallons of resin per part. We often don’t need to know the proprietary details, just an outline of what the equipment requirements are.
Epoxies, Methacrylates, Silicones, and urethanes all need to be handled differently. The viscosity of the materials, and the mix ratio will often affect the metering equipment choices. If you could include a TDS (technical data sheet) it will help us get you the correct options.
Upload a TDS (Technical Data Sheet) or SD (Safety Data) so we can learn more about your material.
Max. file size: 25 MB.
How big are the shots dispensed, how many shots per shift, etc…
This field is for validation purposes and should be left unchanged.

Available Options

Related Products