Pro Meter

Pro Meter

The Pro-meter is a compact, highly versatile, industrial dispensing machine. 

Appropriate for electronics potting, filter end capping, urethane casting, filament winder and roll coater bath supply.  It also excels in many other medium to larger sized applications.

It accurately dispenses metered and mixed material through a static mixer manifold.

The dispense rate is adjustable from a gentle flow up to one gallon per minute.

The ratio is easily adjustable with a sliding ratio adjustment block. 

Capable of dispensing ratios from 2:100 to 100:100, and materials with viscosities from 1cps to 200,000cps+ if self leveling.

Standard delivery of material is thru 8 or 13gal day tanks but the Pro-meter can also be easily configured to deliver the material thru 55-gallon drums, totes, or vacuum degassing tanks.


As with all of Michael Engineering single acting dispensers the Pro Meter is available in two configurations: Vertical and Horizontal. 

The Vertical machine is for used with moisture sensitive materials, like Urethane, Methyl acrylates and some high-performance epoxies. 

The Vertical configuration includes wet cups around the piston rods to keep material from sticking to the piston rods and damaging the seals. It also comes with desiccant filters to remove any moisture from the air that is vented into the reservoirs.

The Horizontal machine is typically used for epoxy, silicone, that are not moisture sensitive.

There is a long list of options for the Pro Meter including: 

Snuff Back Gun: Stops the flow of material instantly allowing the operator to quickly and cleanly move to the next part.

Electronic Shot Size control: Encoder based shot size control with memory locations, Auto Repeat and Purge Timer functions.

Heaters for the reservoirs, pumps, and hoses.

Agitators, both pneumatic and electric.

Carts, Drum Racks, Tote Stands, Vacuum Degassing Tanks, and Supply Pumps.

Level sensors and controls to keep track of and manage the material level.


Product Options

For measuring exact shot size.
Removes dissolved gas and entrapped air from materials for bubble-free parts.
Dispense directly out of 55s or totes!
For protecting extremely moisture-sensitive materials.
For moisture-sensitive materials.
For controlled dispense of your mixed product.
For heating materials to improve flow rate and material reactivity
For heating materials in-reservoir.
For uniformly spraying your material onto any surface.
For dispensing materials in circles from 24mm to 155mm in diameter.
For dispensing epoxy onto your large wet lay-ups.
For mixing two-part materials.

Product Media

Filename File size
ProMeter.pdf 312.21 KB